Safe Polytope-in-Polytope Motion Planning and Control with Control Barrier Functions
About
Autonomous mobile robots operating in tight environments require motion planning frameworks that account for the physical footprint of the robot. Simplifying the geometry to a point or a circle is conservative and discards information needed to successfully and safely traverse narrow passages. This work proposes a safe local motion planning and control method that guarantees that a polytopic robot footprint stays inside a continuously updated convex free-space region. The containment condition is formulated as a set of discrete-time control barrier function constraints within a model predictive controller. The number of safety constraints depends on the complexity of the local free-space geometry and the robot shape, instead of the number of obstacles. The proposed free-space formulation does not need any obstacle detection or segmentation. A comparative analysis against a polytope-based obstacle avoidance formulation confirms favorable scaling up to a reduction of 91$\times$ in computation time as the number of obstacles increases. The approach is validated in simulation with an autonomous surface vehicle and on hardware with a non-holonomic mobile robot, using both occupancy grids and LiDAR sensing. The experiments demonstrate safe real-time motion planning and control at 10~Hz on an onboard embedded computer, including reactive avoidance of dynamic obstacles.