# Task-space dynamic control on Non-segmented bending soft robots (experimental evaluation)

Source: [Task-space dynamic control on Non-segmented bending soft robots (experimental evaluation)](<https://www.sota2.com/research/sota/task-space-dynamic-control-on-non-segmented-bending-soft-robots-experimental-evaluation>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2026-03-18T09:07:15.539Z

Evaluation of dynamic control performance in task space for non-segmented bending soft robots, measured by task speed (in cm/s and mm/s) and task-space RMS error.

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

| Scope | Recorded value |
| --- | --- |
| Task | Task-space dynamic control |
| Dataset (including any stated split) | Non-segmented bending soft robots (experimental evaluation) |
| Metric | Task Speed (cm/s) |
| Unit | SCALAR |
| Direction | Higher is better |
| Results loaded | 2 of 2 |
| Coverage | All results currently returned for this benchmark |

Evaluation settings may differ between results. The original papers and recorded configurations are needed to establish comparability. A shared metric name alone does not establish an identical protocol.

## Metrics

- [Task Speed (cm/s)](<https://www.sota2.com/research/sota/task-space-dynamic-control-on-non-segmented-bending-soft-robots-experimental-evaluation.md?metric=Task%20Speed%20(cm%2Fs)>): Higher is better; unit: SCALAR.

- [Task Speed (mm/s)](<https://www.sota2.com/research/sota/task-space-dynamic-control-on-non-segmented-bending-soft-robots-experimental-evaluation.md?metric=Task%20Speed%20(mm%2Fs)>): Higher is better; unit: SCALAR.

- [Task-space RMS Error (mm)](<https://www.sota2.com/research/sota/task-space-dynamic-control-on-non-segmented-bending-soft-robots-experimental-evaluation.md?metric=Task-space%20RMS%20Error%20(mm)>): Lower is better; unit: SCALAR.

## Recorded results

| Method | Task Speed (cm/s) | Result date | Report paper |
| --- | --- | --- | --- |
| KO with K-LQR | 37 | Not recorded | 69ba31920636e5bf4afc08ac |
| KO with MPC | 0.6 | Not recorded | 69ba31920636e5bf4afc08ac |

### KO with K-LQR

Task Speed (cm/s): 37. Result ID: 69ba6b4347f34ce924a48a3b.

[Reporting paper](<https://www.sota2.com/research/paper/69ba31920636e5bf4afc08ac.md>)

Recorded evaluation configuration: {"Model":"KO","Technique":"K-LQR","Material softness":"■□□□","Deformation strains (Torsion)":"×","Deformation strains (Bending)":"✓","Deformation strains (Axial)":"×","3D Motions":"✓","Generalizability":"■■□","No Training Required":"×","Stability Guaranteed":"∼","Task-level Feedback":"✓"}. This record does not assert independent reproduction.

### KO with MPC

Task Speed (cm/s): 0.6. Result ID: 69ba6b4347f34ce924a48a3c.

[Reporting paper](<https://www.sota2.com/research/paper/69ba31920636e5bf4afc08ac.md>)

Recorded evaluation configuration: {"Model":"KO","Technique":"MPC","Material softness":"■■□□","Deformation strains (Torsion)":"×","Deformation strains (Bending)":"✓","Deformation strains (Axial)":"×","3D Motions":"×","Generalizability":"■■□","No Training Required":"×","Stability Guaranteed":"∼","Task-level Feedback":"×"}. This record does not assert independent reproduction.

Page 1 of 1. This is an index page, not the full collection.
