# Nature of Cr Segregation in FCC to BCC quenched Fe-12Cr Alloy, with Post-Quenching Heat Treatment: A Positron Annihilation Study

Source: [Nature of Cr Segregation in FCC to BCC quenched Fe-12Cr Alloy, with Post-Quenching Heat Treatment: A Positron Annihilation Study](<https://www.sota2.com/research/paper/6a6837f0ecc699bfe1859b2a>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2026-07-29T05:00:05.450Z

Authors: S. Hari Babu, V. R. Reddy

Published: 2026-07-27T04:43:03.000Z

## Abstract

The Fe-Cr binary alloy is a model system for ferrtitic/martensitic steels. Cr clustering instigated loss of ductility, is one of the influential factors to deteriorate the alloys, and its severity depends on Cr concentration. This study aims at understanding (i) the nature of Cr precipitation in Fe-12Cr alloy using positron lifetime spectroscopy, transmission electron microscopy and M\\"ossbauer spectroscopy studies and (ii) comparing the precipitation concentration and size with respect to Fe-9Cr alloy. The quenched alloys (from the high temperature FCC phase) are found to contain a high density of dislocations along with the sub-grain structure which lead to Cr rich {\\sigma}-phase precipitation during post-quenching heat treatment at 748 K, while the alloy prepared with no dislocations and the sub-grain structure shows no precipitation, except at grain boundaries, consistent with observations in Fe-9Cr alloys. Selected area diffraction confirmed that the precipitates are tetragonal intermetallic {\\sigma}-phase, contradicting the majority of the literature on Fe-Cr ferritic alloys which reported it as Cr rich BCC {\\alpha}'-phase. Mossbauer spectroscopy studies showed signatures of Cr depletion from the rest of the matrix, indicating that the precipitates are Cr rich compared to the alloy composition. The kinetics of Cr precipitation is found to be higher in the Fe-12Cr alloy compared to the Fe-9Cr alloy. The average precipitate size is observed to be higher and the number density is lower in the Fe-12Cr alloy compared to the Fe-9Cr alloy. In addition, the experimental positron lifetime in defect-free lattice of Fe-(9, 12)Cr alloys is reported for the first time with substantial evidence.

## Recorded benchmark results

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

## Original sources and implementation

[Original paper](<https://arxiv.org/abs/2607.23995>)

[PDF](<https://arxiv.org/pdf/2607.23995.pdf>)
