# Force Polytope-Based Cant-Angle Selection for Tilting Hexarotor UAVs

Source: [Force Polytope-Based Cant-Angle Selection for Tilting Hexarotor UAVs](<https://www.sota2.com/research/paper/69d5e1407d0172140ec75cda>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2026-04-09T05:00:13.067Z

Authors: Alberto Piccina, Massimiliano Bertoni, Angelo Cenedese, Giulia Michieletto

Published: 2026-04-07T15:24:09.000Z

## Abstract

From a maneuverability perspective, the main advantage of tilting multirotor UAVs lies in the dynamic variability of the feasible executable wrench, which represents a key asset for physical interaction tasks. Accordingly, cant-angle selection should be optimized to ensure high performance while avoiding abrupt variations and preserving real-world feasibility. In this context, this work proposes a lightweight control framework for star-shaped interdependent cant-tilting hexarotor UAVs performing interaction tasks. The method uses an offline-computed look-up table of zero-moment force polytopes to identify feasible cant angles for a desired control force and select the optimal one by balancing efficiency and smoothness. The framework is integrated with a geometric full-pose controller and validated through Monte Carlo simulations in MATLAB/Simulink and compared against a baseline strategy. The results show a significant reduction in computation time, together with improved pose-tracking performance and competitive actuation efficiency. A final physics-based simulation of a complete wall inspection task in Simscape further confirms the feasibility of the proposed strategy in interacting scenarios.

## Recorded benchmark results

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

- [Trajectory Tracking on RotorSuite Monte Carlo Simulation](<https://www.sota2.com/research/sota/trajectory-tracking-on-rotorsuite-monte-carlo-simulation.md>): Trajectory tracking; RotorSuite Monte Carlo Simulation; Mean Computation Time: 0.0521.

## Original sources and implementation

[Original paper](<https://arxiv.org/abs/2604.05998>)

[PDF](<https://arxiv.org/pdf/2604.05998.pdf>)
