# Component-wise Power Estimation of Electrical Devices Using Thermal Imaging

Source: [Component-wise Power Estimation of Electrical Devices Using Thermal Imaging](<https://www.sota2.com/research/paper/68fa7fe91e209131cea9b6ad>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2025-10-26T06:54:31.635Z

Authors: Christian Herglotz, Simon Grosche, Akarsh Bharadwaj, Andr\\'e Kaup

Published: 2023-07-17T09:45:42.000Z

## Abstract

This paper presents a novel method to estimate the power consumption of distinct active components on an electronic carrier board by using thermal imaging. The components and the board can be made of heterogeneous material such as plastic, coated microchips, and metal bonds or wires, where a special coating for high emissivity is not required. The thermal images are recorded when the components on the board are dissipating power. In order to enable reliable estimates, a segmentation of the thermal image must be available that can be obtained by manual labeling, object detection methods, or exploiting layout information. Evaluations show that with low-resolution consumer infrared cameras and dissipated powers larger than 300mW, mean estimation errors of 10% can be achieved.

## Recorded benchmark results

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

## Original sources and implementation

[Original paper](<https://arxiv.org/abs/2307.08354>)

[PDF](<https://arxiv.org/pdf/2307.08354.pdf>)
