# Dynamic Tube MPC for Nonlinear Systems

Source: [Dynamic Tube MPC for Nonlinear Systems](<https://www.sota2.com/research/paper/68fa66131e209131cea0e20f>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2025-10-25T21:42:29.976Z

Authors: Brett T. Lopez, Jean-Jacques E. Slotine, Jonathan P. How

Published: 2019-07-15T15:37:45.000Z

## Abstract

Modeling error or external disturbances can severely degrade the performance of Model Predictive Control (MPC) in real-world scenarios. Robust MPC (RMPC) addresses this limitation by optimizing over feedback policies but at the expense of increased computational complexity. Tube MPC is an approximate solution strategy in which a robust controller, designed offline, keeps the system in an invariant tube around a desired nominal trajectory, generated online. Naturally, this decomposition is suboptimal, especially for systems with changing objectives or operating conditions. In addition, many tube MPC approaches are unable to capture state-dependent uncertainty due to the complexity of calculating invariant tubes, resulting in overly-conservative approximations. This work presents the Dynamic Tube MPC (DTMPC) framework for nonlinear systems where both the tube geometry and open-loop trajectory are optimized simultaneously. By using boundary layer sliding control, the tube geometry can be expressed as a simple relation between control parameters and uncertainty bound; enabling the tube geometry dynamics to be added to the nominal MPC optimization with minimal increase in computational complexity. In addition, DTMPC is able to leverage state-dependent uncertainty to reduce conservativeness and improve optimization feasibility. DTMPC is demonstrated to robustly perform obstacle avoidance and modify the tube geometry in response to obstacle proximity.

## Recorded benchmark results

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

- [Quadrotor Control on System 1 Quadrotor with Drag](<https://www.sota2.com/research/sota/quadrotor-control-on-system-1-quadrotor-with-drag.md>): Quadrotor Control; System 1 Quadrotor with Drag; Total Cost: 100.

- [Quadrotor Control on System 2 Quadrotor with Vector Drag](<https://www.sota2.com/research/sota/quadrotor-control-on-system-2-quadrotor-with-vector-drag.md>): Quadrotor Control; System 2 Quadrotor with Vector Drag; Total Cost: 100.

- [Quadrotor Control with Parametric Uncertainty on Case Study 1 Quadrotor with Drag](<https://www.sota2.com/research/sota/quadrotor-control-with-parametric-uncertainty-on-case-study-1-quadrotor-with-drag.md>): Quadrotor Control with Parametric Uncertainty; Case Study 1 Quadrotor with Drag; Total Cost: 100.

- [Quadrotor Control with Parametric Uncertainty on Case Study 2 (Quadrotor with Vector Drag)](<https://www.sota2.com/research/sota/quadrotor-control-with-parametric-uncertainty-on-case-study-2-quadrotor-with-vector-drag.md>): Quadrotor Control with Parametric Uncertainty; Case Study 2 (Quadrotor with Vector Drag); Total Cost: 100.

- [Autonomous Car Racing on Safe Autonomous Car Racing](<https://www.sota2.com/research/sota/autonomous-car-racing-on-safe-autonomous-car-racing.md>): Autonomous Car Racing; Safe Autonomous Car Racing; Safe Runs (%): 80.

## Original sources and implementation

[Original paper](<https://arxiv.org/abs/1907.06553>)

[PDF](<https://arxiv.org/pdf/1907.06553.pdf>)
