# Probabilistic LCF Risk Evaluation of a Turbine Vane by Combined Size Effect and Notch Support Modeling

Source: [Probabilistic LCF Risk Evaluation of a Turbine Vane by Combined Size Effect and Notch Support Modeling](<https://www.sota2.com/research/paper/68fa53a81e209131ce984e4d>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2026-06-05T05:01:16.371Z

Authors: Lucas M\\"ade, Sebastian Schmitz, Georg Rollmann, Hanno Gottschalk, Tilmann Beck

Published: 2017-02-19T15:24:17.000Z

## Abstract

A probabilistic risk assessment for low cycle fatigue (LCF) based on the so-called size effect has been applied on gas-turbine design in recent years. In contrast, notch support modeling for LCF which intends to consider the change in stress below the surface of critical LCF regions is known and applied for decades. Turbomachinery components often show sharp stress gradients and very localized critical regions for LCF crack initiations so that a life prediction should also consider notch and size effects. The basic concept of a combined probabilistic model that includes both, size effect and notch support, is presented. In many cases it can improve LCF life predictions significantly, in particular compared to \\textit{E-N} curve predictions of standard specimens where no notch support and size effect is considered. Here, an application of such a combined model is shown for a turbine vane.

## Recorded benchmark results

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

## Original sources and implementation

[Original paper](<https://arxiv.org/abs/1702.05759>)

[PDF](<https://arxiv.org/pdf/1702.05759.pdf>)