# A Quantitative Analysis of the Ignition Characteristics of Fine Iron Particles

Source: [A Quantitative Analysis of the Ignition Characteristics of Fine Iron Particles](<https://www.sota2.com/research/paper/68fa41261e209131ce8f8b90>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2025-10-25T03:09:58.348Z

Authors: Xiaocheng Mi, Aki Fujinawa, Jeffrey M. Bergthorson

Published: 2021-10-28T23:10:17.000Z

## Abstract

Ignition of iron particles in an oxidizing environment marks the onset of a self-sustained combustion. The objective of the current study is to quantitatively examine the ignition characteristics of fine iron particles governed by the kinetics of solid-phase iron oxidation. The oxidation rates are inversely proportional to the thickness of the oxide layer and calibrated using the experimentally measured growth of iron-oxide layers over time. Steady-state and unsteady analysis have been performed to probe the dependence of the critical gas temperature required to trigger a thermal runaway (namely, the ignition temperature $T\_\\mathrm{ign}$) on particle size, initial thickness of oxide layer, inert gas species, radiative heat loss, and the collective heating effect in a suspension of particles. Both analyses indicate that $T\_\\mathrm{ign}$ depends on $\\delta\_0$, i.e., the ratio between the initial oxide layer thickness and particle size, regardless of the absolute size of the particle. The unsteady analysis predicts that, for $\\delta\_0 \\lesssim 0.003$, $T\_\\mathrm{ign}$ becomes independent of $\\delta\_0$. Under standard conditions in air, $T\_\\mathrm{ign}$ is approximately 1080 K for any particle size greater than 5 microns. Radiative heat loss has a minor effect on $T\_\\mathrm{ign}$. The collective effect of a suspension of iron particles in reducing $T\_\\mathrm{ign}$ is demonstrated. The transition behavior between kinetic-controlled and external-diffusion-controlled combustion regimes of an ignited iron particle is systematically examined. The influences of initial oxide-layer thickness and particle temperature on the ignition delay time, $\\tau\_\\mathrm{ign}$, of iron particles are parametrically probed. A $d^2$-law scaling between $\\tau\_\\mathrm{ign}$ and particle size is identified.

## Recorded benchmark results

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

## Original sources and implementation

[Original paper](<https://arxiv.org/abs/2110.15461>)

[PDF](<https://arxiv.org/pdf/2110.15461.pdf>)
