# Synthesis and study of highly dense and smooth TiN thin films

Source: [Synthesis and study of highly dense and smooth TiN thin films](<https://www.sota2.com/research/paper/68fa3c411e209131ce8d92e3>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2025-10-25T01:02:58.149Z

Authors: Susmita Chowdhury, Rachana Gupta, Shashi Prakash, Layanta Behera, D. M. Phase, Mukul Gupta

Published: 2020-06-19T10:19:41.000Z

## Abstract

This study aims towards a systematic reciprocity of the tunable synthesis parameters - partial pressure of N$\_2$ gas, ion energy (\\Ei) and Ti interface in TiN thin film samples deposited using ion beam sputtering at ambient temperature (300\\,K). At the optimum partial pressure of N$\_2$ gas, samples were prepared with or without Ti interface at \\Ei~=~1.0 or 0.5\\,keV. They were characterized using x-ray reflectivity (XRR) to deduce thickness, roughness and density. The roughness of TiN thin films was found to be below 1\\,nm, when deposited at the lower \\Ei~of 0.5\\,keV and when interfaced with a layer of Ti. Under these conditions, the density of TiN sample reaches to 5.80($\\pm$0.03)\\,g~cm$^{-3}$, a value highest hitherto for any TiN sample. X-ray diffraction and electrical resistivity measurements were performed. It was found that the cumulative effect of the reduction in \\Ei~from 1.0 to 0.5\\,keV and the addition of Ti interface favors (111) oriented growth leading to dense and smooth TiN films and a substantial reduction in the electrical resistivity. The reduction in \\Ei~has been attributed to the surface kinetics mechanism (simulated using SRIM) where the available energy of the sputtered species (\\Esp) leaving the target at \\Ei~= 0.5\\,keV is the optimum value favoring the growth of defects free homogeneously distributed films. The electronic structure of samples was probed using N K-edge absorption spectroscopy and the information about the crystal field and spin-orbit splitting confirmed TiN phase formation. In essence, through this work, we demonstrate the role of \\Esp~and Ti interface in achieving highly dense and smooth TiN thin films with low resistivity without the need of a high temperature or substrate biasing during the thin film deposition process.

## Recorded benchmark results

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

## Original sources and implementation

[Original paper](<https://arxiv.org/abs/2006.11055>)

[PDF](<https://arxiv.org/pdf/2006.11055.pdf>)
