# Contact resistivity and current flow path at metal/graphene contact

Source: [Contact resistivity and current flow path at metal/graphene contact](<https://www.sota2.com/research/paper/68fa2f6a1e209131ce86c1fd>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2025-10-24T17:33:58.870Z

Authors: K. Nagashio, T. Nishimura, K. Kita, A. Toriumi

Published: 2010-08-11T03:03:30.000Z

## Abstract

The contact properties between metal and graphene were examined. The electrical measurement on a multiprobe device with different contact areas revealed that the current flow preferentially entered graphene at the edge of the contact metal. The analysis using the cross-bridge Kelvin structure (CBK) suggested that a transition from the edge conduction to area conduction occurred for a contact length shorter than the transfer length of ~1 micron. The contact resistivity for Ni was measured as ~5\*10-6 Ohmcm2 using the CBK. A simple calculation suggests that a contact resistivity less than 10-9 Ohmcm2 is required for miniaturized graphene field effect transistors.

## Recorded benchmark results

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

## Original sources and implementation

[Original paper](<https://arxiv.org/abs/1008.1826>)

[PDF](<https://arxiv.org/pdf/1008.1826.pdf>)
