# Formation of Microcrystalline Structure in Large-Scale Ingots of Ti Alloy Ti-6Al-4V during the Complex Loading

Source: [Formation of Microcrystalline Structure in Large-Scale Ingots of Ti Alloy Ti-6Al-4V during the Complex Loading](<https://www.sota2.com/research/paper/68fa2ad01e209131ce841051>)

Collection index: [llms.txt](<https://www.sota2.com/research/llms.txt>)

Data updated: 2025-10-24T13:48:00.928Z

Authors: V. K. Berdin, M. V. Karavaeva, S. K. Kiseleva

Published: 2011-10-14T05:48:11.000Z

## Abstract

A new method of combined loading was developed for manufacturing large - scale ingot of alpha-beta titanium alloy Ti-6Al-4V with the diameter of the gauge 120 mm and the length 300 mm. The process includes torsion with simultaneous tensile deformation, followed by a single compression and drawing of the ingot in alpha-beta temperature phase fields. Ingot structure and mechanical property evaluation was performed after deformation and post-deformation heating. The ingots had completely homogeneous macrostructure. The ingot microstructures were alpha plus beta with a mean grain size of d=10 m. There has not been any significant difference in microstructure of central and periphery areas in the cross section of the ingot.

## Recorded benchmark results

A research result applies to its stated dataset, split, metric and evaluation configuration. Compare like-for-like settings, preserve the metric's unit and direction, and distinguish paper-reported results from independent reproduction. The best result recorded here is not a claim of exhaustive, current global coverage.

## Original sources and implementation

[Original paper](<https://arxiv.org/abs/1110.3122>)

[PDF](<https://arxiv.org/pdf/1110.3122.pdf>)
